Cleaning brush
The cleaning brush is used for cleaning the grinding system. Following the section
of “Clean the grinder”, after removing the bean box and grinding wheel, you can
use the cleaning brush to clean the chamber of grinder and the powder channel.
Clean the anti-static device and coffee
power outlet
(If coffee powder coming out slower than
usual or coffee powder floats, clean the
anti-static device and the coffee powder
outlet with attached cleaning brush as
Fig. 8)
Clean the chamber of grinder and
the powder channel with attached
cleaning brush as Fig. 9.
The rear end of cleaning brush could be
used to detach filter from portafilter as
Fig. 10
- 19 -