VI. Clean the grinder
The grinder may be influenced by coffee beans and some other factors during opera-
tion to make the powder outlet channel be blocked. Please clean the powder outlet
channel in time when the following conditions occur:
VII. Clean the grinder
Clean the powder outlet and grinder at least once every two weeks.
When there’s reduction in powder amount, please clean the powder passage and
grinding wheel.
When the coffee grinder is used to grind fine coffee powder, please clean the
powder channel in time.
The machine is equipped with an anti-static system which could prevent coffee
powder from spreading outside in grinding. When coffee powder floats out from
portafilter, please use the cleaning brush to clean the the powder entrance area
in time.
a.
b.
c.
d.
- 20 -
Rotate the bean box counterclockwise to remove the bean box.
Turn the internal grinding wheel counterclockwise and move it out. Use
the attached cleaning brush to clean the grinding wheel and remove the
coffee powder in the gears. Please note that the grinding wheel cannot be
directly rinsed with water.
Use the attached cleaning brush to clean the grinding chamber and the
powder channel.
Do not install the grinding wheel at this time, re-install the empty bean
box,press the Single-cup (Grind) button “ ” or Double-cup button
When cleaning the grinder, please make sure there are no beans in bean box,
and when the Single-cup (Grind) button “ ” or Double-cup button (Grind)
“ ” is pressed, the grinder can work properly and no coffee powder flows
out from powder outlet.
•
•
•
•
NOTE:
To Next Page
Loading...
Need help?
General