Descaling
This product has a descaling reminder function and a descaling program, which
needs your operation as following steps. Descaling process takes about 10 minutes.
- 21 -
(Grind) “ ” , let the grinder run to sweep out the powder residue in
the grinding chamber. (If powder inside is not removed completely,
please repeat step 3 and 4)
Remove the bean box counterclockwise and install the grinding wheel well
in position. Cleaning is completed.
•
Ensure that there is at least 1 liter of water in the water tank.
Empty the drip tray and install it in place.
Turn on the machine and make it stay in standby mode.
Place double-cup filter into the portafilter.
Turn the portafilter into the portafilter bracket.
You can exit the cleaning function at any time by pressing the ON/OFF
button “ ” .
When the cleaning starts, the indicator of ON/OFF button “ ” and
“ ” flashes. And they will keep flashing during the whole cleaning
process.
If the descaling does not start within 1 minute, the appliance will exit from
the descaling cycle and return to standby mode.
•
•
•
•
•
•
•
•
When starting the descaling program, please make sure:
NOTE:
To Next Page
Loading...
Need help?
General