After completing the above steps, you can start the cleaning process as follow-
ing:
a.
b.
c.
When the system detects that the flow amount of the whole machine reaches
15L, the descaling indicator will flash, which means the appliance needs to be
performed descaling, at that time, you can activate the descaling function manu-
ally.
In standby mode, hold and press the Single-cup button “ ” , Double-cup
button “ ” and Program button “ ”, and the machine will start the descal-
ing process.
When the indicator of “ ” flashes , follow the steps as below.
- 23 -
Step 1: Start the descaling cycle
a.
b.
c.
d.
e.
Turn the knob to “ ” position.
The “ ” lights solidly and the indicator of ON/OFF button “ ” and
steam/hot water indicator flashes.
The pump starts to work, the hot water dispenses from the brewing head and
steam tube, and the pump will make different noises after 2 minutes.
When the hot water stops coming out from brewing head and steam tube, the
step is completed.
The indicator of steam/hot water indicator flashes to remind turning the knob to
“ ” position.
Place a container
Place a container (1 liter) under the brewing head and another container (1 liter)
under the steam tube.
To Next Page
Loading...
Need help?
General