Cygnus MR500 Taximeter User Manual
4
2.4 "On" and "Off" Modes - When the taxi is not for hire
When in OFF mode, the meter’s display is blank. In ON mode,
there is a dot shown in the Rate Window. There may also be a
clock display in the Fare Window.
If the meter is in ON mode and your vehicle does not move for 30
seconds, it changes automatically to OFF mode. If the meter is in
OFF mode and your vehicle moves, it changes to ON mode.
Figure 3: On Mode
Press “MODE” to
enter FOR HIRE
mode.
Press “REVERT” to
revert to OFF Mode.