What does Close Shutter Fault mean on Cynosure Medical Equipment?
A 'Close Shutter Fault' on Cynosure medical equipment indicates that the safety shutter is stuck open. Do not use the laser until it has been serviced.
What does H2o Flowmeter mean on Cynosure Medical Equipment?
An 'H2o Flowmeter' issue with Cynosure medical equipment means there is a defective water flow sensor, requiring service.
How to resolve IGBT Fault - YAG on Cynosure Medical Equipment?
An 'IGBT Fault - YAG' on Cynosure medical equipment indicates a YAG IGBT overload. Cycle the power to continue.
What causes HVPS Fault in Cynosure Medical Equipment?
An 'HVPS Fault' in Cynosure medical equipment indicates an HVPS over-voltage or open-circuit.
What does Checksum Error mean on Cynosure Medical Equipment?
A 'Checksum Error' on your Cynosure medical equipment indicates a computer program memory error, requiring service.
General| Wavelength | 585 nm (Pulsed Dye), 1064 nm (Nd:YAG) |
|---|---|
| Laser Type | Pulsed Dye and Nd:YAG |
| Spot Size | 2 mm, 3 mm, 5 mm, 7 mm, 10 mm |
| Fluence | 5 - 600 J/cm² (Nd:YAG) |
| Electrical Requirements | 200-240 VAC, 50/60 Hz |
| Display | Touchscreen |
| Energy Output | Pulsed Dye: Up to 20 Joules, Nd:YAG: Up to 60 Joules |
| Cooling System | Integrated Dynamic Cooling Device (DCD) |
To Next Page
