CYP AU-11CA - Introduction to AU-11 CA HDMI Audio Embedder; Key Features of AU-11 CA; Whats Included with AU-11 CA

Page 1
1. Introduction
The AU-11CA Audio Embedder lets you insert an external audio signal into any
HDMI source. The device allows you to insert analogue or digital stereo and multi-
channel digital surround sound signals (via Optical) to give users the capability to
overcome audio issues within complex HDMI installation. The AU-11CA also repeats
the HDMI signal to allow an extended total HDMI cable range.
2. Features
• Compliant with HDMI v1.3 , HDCP 1.2 and DVI 1.0
• Supports Optical Sample Rate up to 48 kHz.
• Supports LPCM Stereo, DTS and Dolby Digital via Optical input.
• Supports up to 24bit resolution digital audio.
• HDMI cable distance testing showed that with 1080p 8bit/12bit resolution, the
input/output distance is up to 10 meters.
• Low power consumption.
• Supports HDMI Sample Rates up to 192 kHz
• Simple switched operation
• Supports 3D signals.
3. Package Contents
• HDMI to CAT6 Transmitter.
• 5V / 1A Power Adaptor
• Operation Manual.