CYP CA-DVIAT - Introduction to DVI over CAT5 Extender; Applications of DVI CAT5 Extender; Package Contents; System Requirements for DVI CAT5 Extender

1. Introduction
DVI transmitter and receiver over CAT 5 is a pair of extender for DVI signal -
up to 250 meters long. Not only can this device transfer the HD image signal
but also the analog/digital audio signal with coaxial and L/R audio port.
Through the DDC cable the device can also support HDCP and CEC. This
extender is perfect for extending high resolution digital signage with crystal
clear images over low cost network solution.
2. Application

For long distance DIV/HDMI source display in a separate room or class.

For long distance digital or analog sounds transferring up to 250M long.

Any PC source equipment with output DVI connector.
3. Contents

DVI over CAT 5 Transmitter x 1

DVI over CAT 5 Receiver 250M x 1

Operational Manual x 1

5V/2.6A Power Adaptor x 2
4. System Require
PC/DVI/HDMI source with DVI output connector, DVI to DVI or HDMI to DVI
cable(s), CAT 5 cable(s) and DVI display monitor or HDMI TV/Monitor.
1