CYP PU-507TX-HDVGA - Remote Control

10
6.3 Remote Control
1
INPUT: Press this button to switch
HDMI/PC input source instantly.
2
EXIT: Press this button to exit
the menu or escape the current
selection under OSD.
3
MENU: Press this button to enter
into the OSD menu.
4
RESET: Press this button to set the
device back into the factory default
setting.
5
AUTO ADJUST: Press this button
to optimise the positioning of the
picture (picture centering) on the
screen.
6
ENTER (OK) &
▲▼◄►
: Press Enter
to conrm the selection or press the
arrow buttons to scroll in the OSD
selections.
CR-128
OK
INPUT
EXIT MENU
RESET AUTO
ADJUST
1
2
4
6
3
5