page 24 - CYPRES 2 User’s Guide -
4. How to operate CYPRES 2
4.1 Handling the control unit
The button on the control unit should be pressed
with the ngertip; please do not use a ngernail
or any other object. Use a short click action in the
middle of the button.
You should familiarize yourself with switching
CYPRES 2 on and off (see chapter 4.2) and chang-
ing the dropzone offset (see chapter 4.4.1) and all
other handling prior to use.
The button is the only means the user has for
controlling CYPRES 2 functions. For a skydiver
necessary handling is reduced to the following
actions:
• switching on
• switching off
• increasing dropzone offset
• decreasing dropzone offset
• viewing the ight counter
viewing the serial number
viewing the next possible maintenance date
• adjusting the activation altitude
• changing the scale, feet / meter
• Wing Suit CYPRES: choosing canopy sta-
tus Expert or Speed
• Wing Suit CYPRES: choosing time dura-
tion for status change
The following sections provide thorough descrip-
tions of these procedures.
To Next Page
Loading...
