Reference Design Package Contents
8 FX2LP DMB-T/H TV Dongle Reference Design Guide, Doc. No. 001-54437 Rev. *A
2.1.3 Firmware
This folder contains the firmware. For USB Download, the firmware is available in .hex format.
Contact your local Cypress Sales office for more information and support on firmware.
2.1.4 Hardware
This folder contains all the files required for hardware design.
Contains the Bill of Materials for both versions of the design
Contains the layout files for PCB manufacturing
Contains the schematics files of the design in .pdf and .dsn format
2.2 Device Functionality
After the PCB is fabricated and assembled based on the files mentioned earlier, the next step is to check the functionality
of the design.
The design has multiple firmware download options. These include:
USB Download (Manual)
USB Download (Automatic)
EEPROM Download (C0 Load, C2 Load)
The current PCB settings support C0 Load with your own VID and PID. A driver is also provided along with the design for
automatic USB Download. Automatic USB Download option is explained in the following sections.
Contact your local Cypress Sales office for any support related to the demonstration or for queries on designing the PCB.
To Next Page
Loading...
