Cyrusher S700 - User Manual

Cyrusher Sports Team
www.cyrusher.com
info@cyrusher.com
1 / 27
S700 Bike Computer User Manual
This bike computer user manual is only for Cyrusher XF500,Extrbici XF660 1000W, Cyrusher
XF690, Cyrusher XF770, Lankeleisi XT750,Lankeleisi G550,Lankeleisi T8 and Lankeleisi XT750
plus operations setting reference.
If you are using other Cyrusher or Lankeleisi Ebikes models, please contact Cyrusher Sports
Team for help.
Bike Computer Screen:
Technical Symbol Definition：

Summary

Bike Computer Screen

Display Elements

Details the various indicators and readouts on the S700 bike computer screen.

Technical Symbol Definitions

Speed and Mileage Indicators

Explains speed (average, max, real-time) and mileage (trip, odometer, driving distance).

Control and Status Symbols

Defines symbols for front light, walk mode, cruise control, PAS levels, and battery status.

Operation Instructions

Basic Operations and Controls

Instructions for turning the computer on/off, front light, and walk mode activation.

PAS Level Adjustment

Guide on increasing or decreasing the Pedal Assist System (PAS) level.

Data Checking and Navigation

How to cycle through ODO, TRIP, ERR, and TIME data displays on the computer.

Entering and Navigating Settings

Steps to access and switch between various setting parameters (P01 to P18).

P Level Setting Definitions (P01-P02)

Brightness and Speed Unit Configuration

Settings for screen brightness (P01) and speed units (P02) between KM/H and MPH.

P Level Setting Definitions (P03-P06)

Voltage, Shut-down, PAS, and Wheel Diameter

Configuration for voltage (P03), auto shut-down (P04), PAS preference (P05), and wheel diameter (P06).

P Level Setting Definitions (P07)

Speed Monitor Setting

Defines the P07 setting for speed monitoring, intended for engineer use.

P Level Setting Definitions (P08-P13)

Speed Limit and Boost Settings

Configuration for speed limit (P08) and zero/non-zero boost modes (P09).

Driving Modes and PAS Sensitivity

Settings for driving modes (P10), PAS sensitivity (P11), PAS strength (P12), and sensor (P13).

P Level Setting Definitions (P14-P18)

Controller Settings and Odometer Clearance

Settings for controller current limit (P14), low voltage (P15), and clearing the odometer (P16).

System Reset and N;V Setting

Configuration for system setting P17 (N/V) and resetting the bike computer (P18).

Error Codes and Model Settings

Error Code Reference

Lists common error codes (00000-00011) and their potential causes/solutions.

Default Settings by E-bike Model

Explains variations in default settings, especially P06, across different e-bike models.

Cyrusher S700 Specifications