Cyrusher X2000 Plus - Bike Computer Operation Guide; Power, Light, and Walk Mode Control; PAS Level and Data Navigation; Entering and Navigating Settings

Cyrusher Sports Team
www.cyrusher.com
info@cyrusher.com
4 / 26
1. Turn on/ Turn off bike computer: Press for seconds to turn or turn off the
bike computer;
2. Turn on/ Turn off bike front light: After turning on the bike computer and press
for 3 seconds to turn on or turn off front light.
3. Active walk mode(Optional) : After turning on the bike computer and press
for 3 seconds to active the walk mode
4. Increase/ Decrease PAS Level: After turning on the bike computer and press
to increase the PAS Level and Press to decrease PAS
level.
5. Check ODO/ TRIP/VOL/TIME: After turning on the bike computer and press
one time to switch and check data of ODO/ TRIP/VOL/TIME
6. Enter Setting Mode: After turning on the bike computer and press and