CZone Switch Control Interface User Manual

Product description:
The Switch Control Interface (SCI) is a module which converts signals from traditional mechanical switches and converts them into a CAN
signal to control loads via channels on output interface modules
• 8 switch channels per module (sixteen switch points)
• Single switch position can control multiple OI channels
• Multiple SCI switches can control single OI channel
• Output for backlighting of switch labels (dimmable)
• Outputs systems on and function/fault codes to systems
on LED of switches (dimmable)
• Programmable switch types
Normally open
Normally closed
Momentary open or closed
Dimmer
Timer
Interlocking
Dimensions:
H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)
• IPX5 water ingress rated
Weight: 281g
SCI features:
Switch Control Interface (SCI)
For more information contact BEP | ph: +64 9 415 7261 | email: enquiries@bepmarine.com | www.bepmarine.com
EMC ratings:
• IEC EN 60945
• IEC EN 61000
• FCC Class B
• ISO 7637 - 1 (12V Passenger cars and light commercial vehicles
with nominal 12V supply voltage - Electrical transient conduction
along supply lines only)
• ISO 7637 - 2 (24V Commercial vehicles with nominal 24 V supply
voltage - Electrical transient conduction along supply lines only)
• IEC Standards for indirect lighting strikes

CZone Switch Control Interface Specifications

General

Reverse Polarity Protection	Yes
Over Voltage Protection	Yes
Switch Ports	8
Supply Voltage	12-24V DC
Humidity	0-95% non-condensing
Communication Protocol	CAN Bus
Current Consumption	50mA

Summary

LED Flash Codes

Network Status Indicator

Explains the meaning of the network status LED for power and traffic.

Channel Status Indicators

Details the different channel status LED codes and their fault descriptions.

Connections

SCI - 8 Way Connector Housing

Details the SCI 8-way connector housing and its pin numbering.

Internal SCI Conductor Connections

SCI Cable Connections

Lists the conductor color, carling terminal housing, and designation for SCI cables.

Labelling

Connections/LED flash code label

Describes the label inside the unit with LED codes and electrical connections.

Pictorial Overview

Dimensions