LIMIT
SIGNAL
ON
LEVEL
+12
-oo
00
LOOP THRU
INPUT
DR-508A
BOOST
/ FLAT
MIC/LINE
OFF/ON
LED
AMPLIFIER
12
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
D.A.S. Audio, s.a. (Valencia)
MADE IN SPAIN
230V
1.2A 50Hz/60Hz
S.N.
INPUT
LIMIT
SIGNAL
ON
LEVEL
MIC/LINE
+12-oo
00
OFF/ON
LED
LOOP THRU
BOOST
/ FLAT
V115
3A 50Hz/60Hz
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
DR-515A
V115
2.4A 50Hz/60Hz
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL
MIC/LINE
+12-oo
00
OFF/ON
LED
LOOP THRU
INPUT
N1918
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
DR-512A
1
1
1
2
2
2
3
4
5
5
5
4
4
3
3
10
10
10
9
9
9
11
11
11
8
8
8
7
7
7
6
6
6
Manual del Usuario / DR-500 active / User’s Manual
Description
1) INPUT :
1/4” Jack+XLR c
:
1 or S =GND (ground).
2 or T =(+) Non inverted input.
3 or R =(-) Inverted input.
2) LOOP THRU :
XLR-type output signal connector for connecting several units
together and sending them all the same signal.
3) LIMIT :
Red LED indicates amplifier saturation. Amplifier limiter
indicator lights.
4) SIGNAL :
Green LED indicates signal presence.
5) ON :
Green LED indicates that the unit is ON.
6) LEVEL :
Potentiometer for adjusting the unit level.
7) BOOST / FLAT :
Button for switching between two types of frequency response.
8) MIC / LINE :
Button for switching between microphone and line sensitivities.
NEVER PRESS THIS BUTTON WITHOUT FIRST REDUCING
THE LEVEL OF THE UNIT TO AVOID EXTREMELY HIGH SPL.
ombined socket-type input signal connector.
This is a balanced connector just like the LOOP THRU connector
with the following pin assignments
9) LOGO OFF / ON :
Press the button to iluminate the logo.
10) AC INPUT :
PowerCon NAC3FCA mains connector (inserted, rotated and
locked for ON). Only use this equipment with an appropriate
mains cord.
11) POWER :
Mains power ON/OFF switch.