Need help?Do you have a question about the D.A.S. H-1500 and is the answer not in the manual?
General| RMS Power | 1500 W |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| THD | < 0.1% |
| S/N Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.1% |
| Input Impedance | 20kΩ |
General information about the D.A.S. power amplifier's design and technology.
Controls the amplifier's on/off state with a turn-on delay feature.
Indicator light that confirms the amplifier is powered on.
Rotary potentiometers for adjusting the input gain of each channel.
Indicates signal distortion or clipping within a channel.
Signals when a channel's output is protected and disconnected.
Visual indicator for the presence of an audio signal at the input.
Grilles for cooling airflow; must be kept clean for optimal performance.
Binding posts and Speakon NL4 connectors for speaker hookups.
Details XLR input connectors, impedance, and pinout for signal connection.
Switch to select operational modes: stereo, parallel, or bridge.
Information regarding the power cord and safety wiring color codes.
Grilles for cooling air intake, requiring regular cleaning to prevent overheating.
Guidelines for rack mounting the amplifiers, including screw types and chassis stability.
Explanation of the cooling system and necessary ventilation for rack installations.
Guidance on connecting speakers using binding posts or Speakon connectors.
Correct sequence for powering up and down audio system components.
Understanding the CLIP LED to prevent speaker damage from signal distortion.
How to use LEVEL controls for adjusting input gain and its relation to output power.
To Next Page
