SPECIFICATIONS
9
Frequency Response(at 1 Watt)
Total Harmonic Distortion(THD)
Intermodulation Distortion60Hz
and 7KHz at 4:1from full rated
output to -30dB
Slew Rate
Voltage Gain
Damping Factor(8ohms)10Hz-
400Hz
Signal-to-Noise Ratio (below
rated power,20Hz to 20kHz.
A-weighted)
Crosstalk(below rated power)
At 1kHz
At 20kHz
Input Sensitivity for full
rated power at 8Ω
Input impedance(nominal)
Balanced
Unbalanced
20Hz-20KHz,+0-1dB
<0.5%,20Hz-20kHz
=/<0.35%
>10V/us
>200
>100dB
-75dB
-58dB
0.775V or 1.4V
20K ohms
10k ohms
PA-500 PA-900 PA-1500 PA-2700
27dB 31dB 33dB 36dB
1kHz(HIA)with0.5%THD
4Ω stereo(per channel)
8Ω bridge mono
250W
150W
500W
450W
350W
900W
750W
500W
1500W
1350W
1000W
2700W
Rated power /model
Performance
Construction
Ventilation
Protection
Cooling
Power cord specification
Chassis size( unit mm)
Net weight
Protection against short circuits, no-load, on/off muting, RF interference.
Flow-through ventilation from front to back
Internal heat sinks with forced air. Fan cooled, speed regulated,
thermal protection
Plug Wire::10A,250V 3x1.0mm
2
10.1kg 12.7kg 13.5kg 19.5kg
482x227x88 482x294x88
8Ω stereo(per channel)
Manual de Usuario de Amplificadores / PA series / User’s Amplifier Manual