Need help?Do you have a question about the D'Amore engine'ring SMDOM-1 and is the answer not in the manual?
Explains the OM-1's function as a real-time indicator of amplifier clipping and a visual music enhancer.
Highlights key design features like mil-spec FR4 board, high-speed power supply, constant LED brightness, and wide voltage range.
Details operating voltage ranges, required input voltages for full scale, maximum input, and dimensions.
Provides step-by-step instructions for connecting the OM-1's wires to the amplifier and power source.
Outlines the process for calibrating the OM-1 using a DD-1 distortion detector for accurate clipping indication.
Describes how to calibrate the OM-1 by ear without a distortion detector for optimal peak LED activation.
Addresses common issues like no meter movement or meters not returning to zero, offering solutions for each.
Details the product's one-year warranty, coverage limitations, and procedures for obtaining service.
Explains the OM-1's function as a real-time indicator of amplifier clipping and a visual music enhancer.
Highlights key design features like mil-spec FR4 board, high-speed power supply, constant LED brightness, and wide voltage range.
Details operating voltage ranges, required input voltages for full scale, maximum input, and dimensions.
Provides step-by-step instructions for connecting the OM-1's wires to the amplifier and power source.
Outlines the process for calibrating the OM-1 using a DD-1 distortion detector for accurate clipping indication.
Describes how to calibrate the OM-1 by ear without a distortion detector for optimal peak LED activation.
Addresses common issues like no meter movement or meters not returning to zero, offering solutions for each.
Details the product's one-year warranty, coverage limitations, and procedures for obtaining service.
General| Channels | 2 |
|---|---|
| Frequency Response | 10 Hz - 20 kHz |
| Resolution | 24-bit |
| FFT Length | 32k points |
| Sampling Rate | 48kHz |
To Next Page