Thank You
Congratulations on your purchase of the SMD / D’Amore
Engineering OM-1. This unit is designed and
manufactured in the USA with pride.
A word of caution: This product has exposed circuitry
and components on it. Damage can result from static
discharge into the circuit board. Please handle with care.
Description
The OM-1 can be used as a real time indicator of how
close to clipping your amplifier is being driven (when
calibrated with the SMD / D’Amore Engineering DD-1
Distortion Detector) and / or as a light show to add a
visual sense to your music. Adding a visual sense to your
music is great, as long as it is perfectly in sync. With the
use of high speed circuitry in the OM-1, the response is
instantaneous
About the Design
Some might consider the OM-1 to be over-built; we think
it is just right. Some features of the design are:
Mil spec FR4 circuit board
High speed linear power supply
Constant LED current and brightness regardless
of battery voltage (won’t dim with your beat)
20 bright surface mount LEDs
Adjustable sensitivity
Wide operating voltage range for vehicles with
modified electrical systems
To Next Page
Loading...
Need help?
General