D-Link AirPlus DWL-650+ - Wireless Basics

Using the Configuration Utility
The D-Link AirPlus Configuration Utility window will appear. By default, it will take
you to the Link Info section.
If the utility icon does not appear, double-
click the shortcut icon that has appeared
on your desktop.
A. Status: Displays the
MAC Address of the
A
ccess Point that
is associated with the
DWL-650+.
B. SSID: The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
C. TxRate: The default
setting is 11 Mbps; however,
TxRate settings are auto-
matically determined by the
DWL-650+ depending on the
distance from the access point.
D. Channel: Displays
the channel information.
By default, the channel is
set to 6 and selection is
automatically determined
by the DWL-650+.
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
650+ wireless connection to the access
point. The Signal Strength represents the
wireless signal between the access point
and the DWL-650+. The percentage
coincides with the graphical bar.
F. Data Rate:
Graphically
displays the
statistics of data
transmitted and
received.
A
B
C
D
E
F
DWL-650+