7
Appendix
Using the Configuration Utility
A. Status: Displays the
MAC Address of the
Access Point that is
associated with the
DWL-G122.
B. SSID: The Service Set Identifier
is the name assigned to the
wireless network. The factory
SSID setting is set to default.
C. Frequency:
Displays the current
frequency used by
the adapter.
D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for
peer-to-peer networking.
F. Connection Info:
Displays connected or
authenticated
information.
I. Signal
Strength / Link
Quality: Repre-
sents the
wireless signal
quality and
strength between
the access point
and the DWL-
G122. The
percentage
coincides with
the graphical bar.
H. Channel: Displays
the channel
information. By
default, the channel
is set to 6. Please
note that the DWL-
G122 will automati-
cally adjust channel
depending on the
Access Point.
E. Encryption: Displays the current encryption status of the wireless connection.
G. TxRate: The
default setting is
Auto; meaning,
TxRate settings
are automatically
determined by
the DWL-G122
depending on the
distance from the
access point.
J. Packet Count: Graphically displays the statistics of data
transmitted and received.
J
G
I
A
B
C
D
E
F
H
To Next Page
Loading...
