To Next Page
E
Edward WhiteJul 26, 2025
What to do if my D-Link WDA-2320 RangeBooster G is unable to connect to the wireless network or the Internet?
- JjermainerussellJul 26, 2025
If your computer with the D-Link Adapter WDA-2320 installed can't connect to the wireless network or the Internet, first check the LED indicators on your broadband modem and wireless router to ensure they show normal activity and proper functioning. Verify that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for your network. In Infrastructure mode, ensure the Service Set Identifier (SSID) is the same on both the wireless client and access point. In Ad-Hoc mode, both wireless clients need to have the same SSID. Check that the Network Connection for the wireless client is configured properly. If security is enabled, make sure the correct encryption keys are entered on both the WDA-2320 and the access point.
General
