D-Link AirPlus G DWL-G700AP - Getting Started

8
Please remember that D-Link AirPlus G wireless devices are pre-congured to
connect together, right out of the box, with their default settings.
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or ofce)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
If you are connecting a desktop computer in your network, you can install the
D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot
on your desktop computer.
(See the Quick Installation Guide included with the DWL-G510.)
Install the drivers for the wireless Cardbus adapter into a laptop computer.
(e.g, the DWL-G630; See the Quick Installation Guide included with the
DWL-G630.)
Setting up a Wireless
Infrastructure Network
6
2
1
3
4
Getting Started
Connect the router to the D-Link AirPlus G DWL-G700AP.
(See the Quick Installation Guide included with the DWL-G700AP.)
For a typical wireless setup at home (as shown above), please do the following:
5
DWL-G700AP