25
Using the Configuration Menu (continued)
Home > Wireless>AP Client Mode(continued)
Remote AP Mac
Address or
Site Survey-
will transform any IEEE 802.3 device(e.g., a computer, printer,
etc.). into an 802.11b wireless client when it communicates with
another DWL-2100AP that is acting as the root AP. Enter the MAC
address of the root AP or site survey to choose the root AP in your
network.
Authentication-
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-PSK to communicate using WPA encryption
Open System-
When Open System is selected , the following field will be configurable.
other methods of authentication will have different configuration fields.
Encryption-
Select Disable or Enable(Disable is selected here .
Key Type-
Select HEX or ACII.
Key Size-
Select 64-,128-,152- bits.
Valid Key-
Select the 1st through the 4th key to be the active key.
WPA mode-
PSK - The Pre-Shared Key mode of WPA does not require the
inclusion of a RADIUS server in your networks.
Passphrase-
If you selected PSK you will need to enter a Passphrase in this
field.
To Next Page
Loading...
