D-Link AirPlus Xtreme G DWL-2100AP - Apply Settings

37
Using the Configuration Menu (continued)
Tools > System
Tools > Firmware
Click Restart to
apply the system
settings and restart
the DWL-2100AP.
Apply Settings
and Restart-
Click Restore to
return the
DWL-2100AP to its
factory default
settings.
Restore to
Factory Default
Settings-
After you have
downloaded the
most recent version
of the firmware
from www.support.
dlink.com you can
browse your hard
drive to locate the
downloaded file and
click OK to update
the firmware.
Update File-
v2.00