D-Link AirPlus Xtreme G DWL-2100AP - Page 38

38
Using the Configuration Menu (continued)
Tools > Cfg File
Tools > Misc.
Browse for the
configuration
settings that you
have saved to your
hard drive. Click OK
when you made
your selection.
Update File-
Click OK to load
the selected
settings.
Load Settings to
the Local Hard
Drive-
Click to Enable a
Telnet session.
Status-
Telnet Settings
Select a time period
after which a
session timeout will
occur.
Timeout-
Telnet is a program that allows you to control your network from a single PC.