D-Link AirPlus Xtreme G DWL-2100AP - Page 84

84
To hard-reset the D-Link DWL-2100AP to the Factory Default Settings, please do the
following:
Troubleshooting (continued)




After the DWL-2100AP reboots (this may take a few
minutes) it will be reset to the factory Default settings.
Use a paper clip to press the Reset button.
Hold for about 5 seconds and then release.
Locate the Reset button on the back of the
DWL-2100AP.
Reset
8. Resetting the DWL-2100AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose
to Reset the DWL-2100AP to the factory default settings.