32
Using the Configuration Menu
Tools> Admin
Click Apply to save the changes
At this page, the DI-624 administrator can change the system password. There are two
accounts that can access the Broadband Router’s Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access. User
can only view the settings but cannot make any changes.
Administrator-
Password-
Remote Management- Remote management allows the DI-624 to be configured from
the Internet by a web browser. A username and password is still required to access the
Web-Management interface. In general, only a member of your network can browse the
built-in web pages to perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
admin is the Administrator login name
Enter the password and enter again to confirm
User-
Password-
user is the User login name
Enter the password and enter again to confirm
IP Address- The Internet IP address of the computer that has access to the Broadband
Router. If you input an asterisk (*) into this field, then any computer will be able to access
the Router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port- The port number used to access the Broadband Router.
Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
Apply-
To Next Page
Loading...
Need help?
General
