75
Troubleshooting
6. Why can’t I get a wireless connection? (continued)
Turn off your DI-624 and the client. Turn the DI-624 back on again, and
then turn on the client.
Check that the LED indicators are indicating normal activity. If not, check
that the AC power and Ethernet cables are firmly connected.
Make sure that all devices are set to Infrastructure mode.
Check that the IP Address, subnet mask, gateway and DNS settings are
correctly entered for the network.
If you are using 2.4GHz cordless phones, X-10 equipment or other home
security systems, ceiling fans, and lights, your wireless connection will
degrade dramatically or drop altogether. Try changing the Channel on
your DI-624, and on all the devices in your network to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that
generate RF noise, like microwaves, Monitors, electric motors, etc.
7. I forgot my encryption key.
Reset the DI-624 to its factory default settings and restore the other de-
vices on your network to their default settings. You may do this by press-
ing the Reset button on the back of the unit. You will lose the current
configuration settings.
To Next Page
Loading...
Need help?
General
