D-Link AirPlusXtremeG DI-624 User Manual

76
8. Resetting the DI-624 to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-624 to the factory default settings.
Remember that D-Link AirPro products network together, out of the box,
at the factory default settings.
To hard-reset the D-Link AirPro DI-624 to Factory Default Settings, please do
the following:
Troubleshooting




After the DI-624 reboots (this may take a few
minutes) it will be reset to the factory Default
settings
Use a paper clip to press the Reset button
Hold for about 10 seconds and then release
Locate the Reset button on the back of the DI-624
Reset

D-Link AirPlusXtremeG DI-624 Specifications

General

Wireless Standard	802.11g
Standards	IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100Mbps
WAN Ports	1 x 10/100Mbps
Security	WEP, WPA, WPA2
Wireless Data Rates	Up to 54Mbps (802.11g)
Antenna	2 dBi
Firewall	NAT