D-Link COVR-1102 User Manual

27D-Link COVR-1102 User Manual
Section 3 - Conguration
Auto Detection
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you can
manually select another IPv6 connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable DHCP Prex Delegation.
LAN IPv6 Link-
Local Address:
Displays the master COVR Point's LAN link-local address.
If Enable DHCP-PD is disabled, these additional parameters are available for conguration:
LAN IPv6 Address: Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Local Address:
Displays the master COVR Point's LAN link-local address.

D-Link COVR-1102 Specifications

General

DC-in jack	Yes
Ethernet LAN (RJ-45) ports	2
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology	10/100/1000Base-T(X)
Security algorithms	WPA-PSK, WPA2, WPA2-PSK, WPA3
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	866 Mbit/s
Certification	FCC, IC, CE, ErP
Product color	White
LED indicators	Status
Antenna type	Internal
Type	Network transmitter
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum transfer distance	- m
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	8.55 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	RoHS
Flash memory	16 MB
Internal memory	128 MB
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	92 mm
Weight	197 g