EasyManuals Logo

D-Link COVR-1102 User Manual

D-Link COVR-1102
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
28D-Link COVR-1102 User Manual
Section 3 - Conguration
Advanced Settings - Address Autoconguration Settings
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature.
Enabling this feature presents additional conguration options.
Enable Automatic
DHCP-PD in LAN:
Enable or disable DHCP-PD for other IPv6 routers connected to the
LAN interface. This option is only available if Enable DHCP-PD is
enabled.
Note: This feature requires a smaller subnet prex than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Autoconguration
Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:
Router
Advertisement
Lifetime:
Enter the router advertisement lifetime (in minutes).
If you selected Stateful DHCPv6 as the Autoconguration Type:
IPv6 Address
Range (Start):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment.
IPv6 Address
Range (End):
Enter the ending IPv6 address for the DHCP servers IPv6 assignment.
IPv6 Address
Lifetime:
If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in
minutes).
Click Save when you are done.
Auto Detection (Continued)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link COVR-1102 and is the answer not in the manual?

D-Link COVR-1102 Specifications

General IconGeneral
DC-in jackYes
Ethernet LAN (RJ-45) ports2
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology10/100/1000Base-T(X)
Security algorithmsWPA-PSK, WPA2, WPA2-PSK, WPA3
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)866 Mbit/s
CertificationFCC, IC, CE, ErP
Product colorWhite
LED indicatorsStatus
Antenna typeInternal
TypeNetwork transmitter
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum transfer distance- m
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)8.55 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesRoHS
Flash memory16 MB
Internal memory128 MB
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth92 mm
Weight197 g

Related product manuals