D-Link COVR-C1202 User Manual

28D-Link COVR-C1202 User Manual
Section 3 - Conguration
Auto Detection
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you can
manually select another IPv6 connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable DHCP Prex Delegation.
LAN IPv6 Link-
Local Address:
Displays Covr Point A's LAN link-local address.
If Enable DHCP-PD is disabled, these additional parameters are available for conguration:
LAN IPv6 Address: Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Local Address:
Displays Covr Point A's LAN link-local address.

D-Link COVR-C1202 Specifications

General

Brand	D-Link
Model	COVR-C1202
Category	Network Router
Language	English