D-Link COVR-C1202 - Page 34

30D-Link COVR-C1202 User Manual
Section 3 - Conguration
Static IPv6
Select Static IP if your IPv6 information is provided by your Internet Service
Provider (ISP).
Use Link-Local
Address:
Enable or disable link-local address use. Enabling this feature will use
your local IPv6 address as the static IP. Disable this feature to manually
enter your static IPv6 address and subnet prex length.
IPv6 Address: If Use Link-Local Address is disabled, enter the address supplied
by your ISP.
Subnet Prex
Length:
If Use Link-Local Address is disabled, enter the subnet prex length
supplied by your ISP.
Default Gateway: Enter the default gateway for your IPv6 connection.
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
LAN IPv6 Address: Enter the LAN (local) IPv6 address for Covr Point A.
LAN IPv6 Link-
Local Address:
Displays Covr Point A's LAN link-local address.