10D-Link COVR-C1203 User Manual
Section 2 - Installation
2. Wait for the Covr Point to boot up. When the COVR LED starts blinking amber, wirelessly connect your PC or laptop to
the Wi-Fi name (SSID) printed on the back of the device, or on the included Wi-Fi Conguration Card.
1. Position the Covr Point labeled A close to your Internet-connected home router. Next, connect the power adapter and
plug the Covr Point into a power outlet.
G
Manual Installation
If you do not wish to use the D-Link Wi-Fi app, you can also choose to manually set up the COVR-C1203 and congure your
Covr Wi-Fi network using the web-based user interface. Follow the instructions below for how to set up your COVR-C1203
Dual Band Whole Home Wi-Fi System.
A
SSID
Wi-Fi
Wi-Fi
Password
To Next Page
Loading...
