62D-Link COVR-C1203 User Manual
Section 4 - Adding Additional Extenders
Using Wi-Fi Protected Setup (WPS)
The fastest and easiest way to add more COVR-C1200 extenders to your Covr Powerline network is by using the WPS button
on the side panel of each device. Refer to the steps below to learn how to add more COVR-C1200 extenders to your Powerline
network using the WPS button.
2. Once plugged in, wait for the Power, 2.4G, and 5G LEDs on the new
extender to light up solid green, as shown in the image to the right.
1. Plug the new COVR-C1200 extender into a power socket near the
existing router-connected COVR-C1200 extender.
G
1
G
n
G
G
n
G
To Next Page
Loading...
