D-Link DAP-1320 Installation And Setup Guide

3
How do I setup and install my DAP-1320?
Step 4: Unplug and place the DAP-1320 approx half way between the router and the desired con-
nection area.
Note: To connect wireless to the DAP-1320, use the Wi-Fi Network Name (SSID) and Wi-Fi Pass-
word information located on your configuration note.-á
Manual Setup
Step 1: Plug in the DAP-1320
Note: The light should turn red and then start blinking orange

D-Link DAP-1320 Specifications

Wireless Standards and Antennas

wireless standards	IEEE 802.11n, IEEE 802.11g
antenna type	2 Internal Antennas

Weight and Dimensions

dimensions	1.89” x 1.65” x 2.11” (4.8 x 4.19 x 5.36 cm)
weight	0.152 lb (68.94g)