D-Link DAP-1320 Technical Support Setup Procedure

-7-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Technical Support Setup Procedure
 *Firmware 1.10 and higher
DAP-1320 Push Button WPS Configuration
Note: In order to setup the DAP-1320 using WPS, you must have a WPS compatible
router/access point
Step 1: Plug in the DAP-1320
Note: The light should turn red and then start blinking orange

D-Link DAP-1320 Specifications

Wireless Standards and Antennas

wireless standards	IEEE 802.11n, IEEE 802.11g
antenna type	2 Internal Antennas

Weight and Dimensions

dimensions	1.89” x 1.65” x 2.11” (4.8 x 4.19 x 5.36 cm)
weight	0.152 lb (68.94g)