1
ENGLISH
OPTION 1 QRS MOBILE APP SETUP
Scan the QR code below to download the QRS Mobile app from the App
Store or from Google Play and launch it.
Note: Please check the app store for device requirements and compatibility. Not all D-Link
products are supported by the QRS Mobile app.
1 /
QRS Mobile
Once the app is installed, you may now configure your device. Connect to
the device wirelessly by going to the wireless utility on your device. Scan for
the wireless network name as listed on the supplied Wi-Fi Configuration Card.
Select the network and then enter the password.
2 /
Wi-Fi
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
Once you connect to the device, tap on the QRS Mobile icon from your
mobile device, then tap Start to continue. Follow the on-screen instructions
to complete the setup.
3 /
To Next Page
Loading...
