6D-Link DAP-1325 User Manual
Section 1 - Product Overview
Status/WPS LED Indicator
1 2 3
4
1
Reset Button
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1325 for 10 seconds
to restore the factory default settings.
2 Status/WPS LED This LED indicates the current status of the DAP-1325, as detailed on the next page.
3 WPS Button
Press to establish a connection with another WPS compatible device. Pressing the WPS button for 1 second allows
you to connect with Wi-Fi clients using Wi-Fi Protected Setup. Refer to “WPS-PBC Configuration” on page 13 for
more information
4 Signal Indicator LED
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A
single solid amber LED indicates a weak Wi-Fi signal. Refer to “Wireless Signal Strength Indicator LED” on
page 7.
To Next Page
Loading...
