31D-Link DCS-700L User Manual
Section 8: Troubleshooting
9. Should the app be running constantly on my device?
The app can run in the background, allowing you to hear your baby continuously, even when the phone is locked. The smartphone or tablet can
still be used normally while the app is running. If you do not want to hear audio from the camera when the app is open, you can turn o the
Background audio on the Conguration menu. If you close the app, the camera audio will be turned o.
10. How do I adjust the sensitivity of motion and audio detection?
From the Live View page, tap on the screen to reveal the icons, and tap the Conguration icon ( ) to go to the Conguration menu. Tap the
Events arrow to access the motion and audio detection settings.
8. How do I access the camera remotely?
Set up a new mydlink account and/or register your camera with mydlink during the initial setup. Once
the process is complete, you can access the login screen for your mydlink account from the Home page
by sliding the Home icon switch to the right. Enter the E-mail address and Password for your mydlink
account and press Log in.
You will be able to monitor your baby from anywhere, as long as your smartphone or tablet is connected
to the Internet (over Wi-Fi or over a cellular network).
Note: If you do not enable mydlink, you will only be able to view the camera within your home's wireless
coverage area.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
