Mounting your camera (optional)
• Use a 6mm drill bit to drill two holes 43mm
apart, and at least 30mm deep.
• Use a mallet to insert the wall anchors into the
holes.
• Screw the included screws into the wall
anchors.
43mm
30mm
• Place the mounting holes on the base of the
camera over the screws as shown, then slide
the camera down to mount the camera.
FCC ID: KA2CS825LA1
IC: 4216A-CS825LA1
CAN ICES-3 (B)/NMB-3(B)
Model: DCS-820LA1
DCS- 820L
To Next Page
Loading...
