Why am I unable to manage my D-Link DCS-8000LHV2 through mydlink after using ONVIF system?
If you can't manage your D-Link Security Camera through mydlink after using an ONVIF system, it could be because the device settings were changed by another system. To fix this, press and hold the Reset button to restore it to factory settings. After resetting, set it up again via the mydlink app to use mydlink services.
What to do if D-Link Security Camera is not working properly?
If your D-Link Security Camera isn't working as expected, try these steps: First, reset the device and reinstall it. If that doesn't work, press and hold the Reset button until the LED turns solid red. Also, make sure your router is connected to the Internet and has Wi-Fi enabled, and that your mobile device is connected to your router's Wi-Fi with Bluetooth enabled. Finally, ensure your mydlink device is within range of your Wi-Fi network.
General| Sensor type | CMOS |
|---|---|
| Progressive scan | Yes |
| Number of sensors | - |
| Optical sensor size | 1/2.7 \ |
| Fixed focal length | 3.28 mm |
| Maximum aperture number | 2.2 |
| LED type | IR |
| Night vision distance | 5 m |
| Type | IP security camera |
| Certification | CE, LVD, FCC Class B, IC, RCM, NCC |
| Placement supported | Indoor |
| Connectivity technology | Wired & Wireless |
| Minimum illumination | 0 lx |
| Audio formats supported | AAC, LC-AAC |
| Security algorithms | WPA, WPA2, WPA3 |
| Alert notification type | Snapshot alert message, Text alert message |
| Total megapixels | - MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video compression formats | H.264 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Ethernet LAN | No |
| Wi-Fi standards | 802.11g, Wi-Fi 4 (802.11n) |
| Wi-Fi data rate (max) | 2400 Mbit/s |
| Supported network protocols | IPv4, IPv6, DHCP, Bonjour (mDNS and DNS-SD), ONVIF Profile S, RTSP, RTCP, RTP/SRTP, HTTPS |
| Mobile operating systems supported | Android, iOS |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 4 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Mounting type | Desk/Wall |
| Product color | White |
| LED indicators | Status |
| Number of cameras | 1 |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 37 mm |
|---|---|
| Width | 43 mm |
| Height | 95 mm |
| Weight | 59 g |
| Cable length | 1.5 m |
To Next Page
