How to reset D-Link DCS-8000LH if I forgot the password?
If you've forgotten the password for your D-Link Security Camera, you should perform a factory reset. This will revert all settings back to their factory defaults.
How to update firmware on D-Link DCS-8000LH Security Camera?
You can update your D-Link Security Camera's firmware using the mydlink Lite app. The app will notify you when a new firmware version is available.
What to do if my D-Link Security Camera is not working correctly?
If your D-Link Security Camera isn't working correctly, start by checking the camera's LED status. If the LED indicates the camera is working, ensure your router has an active internet connection, and both your mobile device and the camera have working internet connections. If the camera still doesn't work, you might need to reset it and run the setup wizard again.
What to do if I can’t receive the verification e-mail for my mydlink Security Camera account?
If you're not receiving the verification email for your mydlink account, it's possible your email provider is sending it to the Spam folder or blocking it. First, check your Spam or Junk Mail folder. If it's not there, try using a different email address or email host, as spam filters may be blocking the emails.
Why is D-Link DCS-8000LH Security Camera night vision hazy?
If the view from your D-Link Security Camera appears hazy or too bright in night vision mode, it's likely that the IR lights are reflecting off a nearby surface or window. Try repositioning the camera to avoid these reflections or any glare.
Why is there white haze on my D-Link DCS-8000LH Security Camera in night vision mode?
If you're experiencing a white haze while using night vision on your D-Link Security Camera, it's likely due to the IR lights reflecting off a nearby surface. To resolve this, try repositioning your camera to avoid glare from the IR LEDs.
Details the physical components and ports of the camera.
Instructions for downloading and setting up the mydlink Lite mobile app.
How to monitor the camera using the mydlink Lite app on local or remote networks.
Explains the Live View screen interface and its controls.
Configures camera system settings, event triggers, Wi-Fi, and time zone.
Customizes motion detection areas, sensitivity, and enables/disables it.
Customizes sound detection levels and enables/disables it.
Manually configures Wi-Fi network settings for the camera.
Enables or disables push notifications for motion or sound events.
Explains how to perform a factory reset if the camera password is forgotten.
Provides steps to troubleshoot incorrect camera operation, including LED status and reset.
Explains remote access requirements and the mydlink Lite app.
General| Type | IP security camera |
|---|---|
| Certification | CE, CE LVD, ICES, FCC |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Infrared (IR) cut-off filter | Yes |
| Sensor type | CMOS |
| Effective sensor resolution | 1000000 pixels |
| Digital zoom | 4 x |
| Fixed focal length | 2.45 mm |
| Maximum aperture number | 2.4 |
| Closest focusing distance | 0.5 m |
| Audio formats supported | PCM |
| Minimum illumination | - lx |
| Maximum resolution | 1280 x 720 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264 |
| Image quality adjustment | Brightness |
| Security algorithms | WPA, WPA2 |
| Alert notification type | Snapshot alert message, Text alert message |
| Ethernet LAN | No |
| Frequency band | 2.4 GHz |
| Wi-Fi standards | 802.11g, Wi-Fi 4 (802.11n) |
| Supported network protocols | IPv4, ARP, TCP, UDP, ICMP, NTP client (D-Link), DNS client, RTP/RTSP/RTCP, Bonjour |
| Mobile operating systems supported | Android, iOS |
| AC input voltage | 100 - 20 V |
| DC output current | 1 A |
| DC output voltage | 5 |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 4 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Number of cameras | 1 |
| Form factor | - |
| Mounting type | Desk |
| Product color | White |
| LED type | IR |
| Night vision distance | 5 m |
| Interface | WLAN |
Weight and Dimensions| Depth | 35 mm |
|---|---|
| Width | 38 mm |
| Height | 92 mm |
| Weight | 57.7 g |
To Next Page
