D-Link DCS-8000LH - Push Notification

24D-Link DCS-8000LH User Manual
Section 3 - Using the Mobile App
Push Notication
On this page you can enable or disable notications to be pushed to your mobile device in the event
that motion or sound has been detected by the camera.
To enable push notications:
Step 1:
Tap the Enable Push Notication On/O button.
Step 2:
If you are using Android, check the Sound box to play a sound if a notication is sent to your device.
Make sure your notication volume is set on your device. iOS devices do not have this option.
Step 3:
Check the box next to the device you want to send notications (Android)
or slide the button to the right next to the device to turn on (iOS).
You will now receive push notications anytime an event is triggered. This will include
motion detection, sound detection, or if your device is disconnected from the network.