D-Link DCS-8627LH

Other manuals for D-Link DCS-8627LH

Questions and Answers:

W
wilsonzacharyJul 28, 2025
What to do if D-Link Security Camera is not working properly?
- D
  dicksonjonathanJul 29, 2025
  If your D-Link Security Camera isn't working properly, try the following: * Reset the device and reinstall it. You can reset your device by using a paper clip to press and hold the recessed Reset button until the LED turns solid red. * Make sure your router is connected to the Internet and has Wi-Fi enabled. * Ensure that Bluetooth is enabled on your mobile device. * Ensure that your mydlink device is within range of your Wi-Fi network.
S
Stephanie WalkerAug 3, 2025
Why is there white haze when viewing D-Link DCS-8627LH Security Camera in night vision mode?
- J
  Jesse StricklandAug 3, 2025
  If you see a white haze when viewing in night vision mode on your D-Link Security Camera, it's likely because the IR lights on your camera are reflecting off a nearby surface. To resolve this, try repositioning your camera to avoid glare from the IR LEDs.
N
nelsonkennethAug 9, 2025
Why do spotlight and siren turn off after a period of time on D-Link Security Camera?
- C
  crawfordsarahAug 9, 2025
  The spotlight and siren on your D-Link Security Camera might turn off after a set period because of the Auto-off Timer setting in the Device settings. You can adjust this timer to 30, 60, or 90 seconds.
J
Joseph AveryAug 15, 2025
Why does D-Link DCS-8627LH Security Camera get so hot?
- S
  stephanieknappAug 16, 2025
  If your D-Link Security Camera gets too hot, it might be because the spotlight has been activated for a long time or live-view is being used continuously for an extended period. It's not recommended to continuously view in Color Night Vision mode.
J
Jerome BradleyAug 21, 2025
How to fix MicroSD card not working/not supported on D-Link DCS-8627LH?
- J
  Jonathan DayAug 21, 2025
  To use a microSD card with your D-Link Security Camera, it must be formatted to the FAT32 file system. You can do this in the mydlink app by selecting the Format function in the storage menu under the Device settings.

D-Link DCS-8627LH Specifications

General

Type	IP security camera
Certification	CE LVD RCM FCC Class B IC NCC/BSMI
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Wi-Fi	Yes
Ethernet LAN	No
Wi-Fi standards	802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	IPv4, IPv6, DHCP/DHCPv6 Client, Bonjour (mDNS and DNS-SD), ONVIF Profile S, RTSP, SRTP, RTP/SRTP, HTTPS
Built-in HDD	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Form factor	Cube
Mounting type	Wall/Pole
Product color	White
LED indicators	Status
International Protection (IP) code	IP65
Minimum illumination	- lx
Sensor type	CMOS
Optical sensor size	1/2.9 \
Fixed focal length	2.7 mm
Night vision distance	7 m
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Number of cameras	1
AC input voltage	100 - 240 V
DC output current	1 A
DC output voltage	12
Power source type	AC, DC
AC input frequency	50 - 60 Hz
Power consumption (max)	8 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-25 - 45 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	20 - 90 %
Audio formats supported	AAC-LC
Motion sensor technology	Passive infrared (PIR) sensor
Harmonized System (HS) code	85258900