7
The IP Address of your camera must
correspond with your network settings
for you to access the camera. If you
are unsure of what these settings
should be, please check with your
network administrator.
By default, the Admin ID and
Password are blank. If you are
running this Setup Wizard for the first
time, leave both Admin ID and
Password fields blank and simply
click OK to continue.
This screen appears if the default IP
Address of the camera (192.168.0.20)
does not correspond with your local
area network settings. You must
assign an IP address for your camera
that corresponds to your network’s IP
addressing scheme.
Click Yes
Click OK
Click OK
Running the Setup Wizard (continued)
To Next Page
Loading...
Need help?
General
