Need help?Do you have a question about the D-Link DCS-900 and is the answer not in the manual?
General| Camera Type | Network Camera |
|---|---|
| Connectivity | Wired |
| Max. Resolution | 640 x 480 |
| Video Compression | MJPEG |
| Frame Rate | Up to 30 fps |
| Lens | Fixed |
| Network Interface | 10/100Base-T Ethernet |
| Power Supply | 5V DC |
| Image Sensor | CMOS |
| Type | CMOS |
| Sensor | CMOS |
| Resolution | 640x480 |
Details hardware connections like Ethernet and power.
Describes the status indicators on the device.
Instructions for mounting the camera stand.
Guide to connecting the network cable.
Steps to connect the power adapter.
Details the installation process when DHCP is available.
Describes steps when DHCP is not available.
Instructions for PPPoE connection setup.
Displays live video feed from the camera.
Configures LAN and Internet settings.
Explains IP Address Mode, PPPoE, DNS, and UPnP.
Configures Dynamic DNS settings for changing IP addresses.
Configures video quality, resolution, and frame rate.
Explains video quality parameters like brightness, contrast, and frame rate.
Configures email settings for alerts and notifications.
Covers E-mail account, scheduling, and testing.
Configures FTP upload settings for storing data.
Explains FTP server, time schedule, and testing.
Configures the camera's time zone and synchronization.
Manages device settings like passwords and users.
Covers password, system, and user management.
Saves and restores camera configuration settings.
Updates the camera's firmware to the latest version.
Displays current device settings and network details.
Configures ports for remote camera access, including alternatives.
Sets up port forwarding for remote viewing.
Describes the IPView SE interface and its icons.
Covers adding, deleting, and changing camera IP addresses.
Instructions for removing a camera from IPView SE.
Guide to modifying a camera's IP address in IPView SE.
Explains formatting, rotating, and listing camera views.
Displays a list of cameras and their properties.
Details starting/stopping recording and taking snapshots.
Configures motion detection options and sensitivity.
Covers manual recording and setting up scheduled recordings.
Enables recording triggered by motion detection.
Cycles through cameras and displays detailed information.
Plays back recorded video files.
Configures system settings and profiles.
Settings for profiles, log storage, and storage lists.
Displays software version and details for IPView SE.
Answers common questions about the camera's features.
Addresses common issues like power, network, and image problems.
Checks network connectivity and IP address conflicts.
To Next Page
