43
Password Setting –
y Admin: Allow you to specify and save the Administrator’s ID name and password.
System Setting –
y Camera Name: Allow you to specify a name for your IP camera.
y Location: Enter information of where your camera is located.
y LED Control: You can set the LED of the DCS-900 to on (Normal), off (OFF), or blink randomly (Dummy).
y User Access Control: Allow you to enable or disable user access control.
Define Users –
y Add User: This will enable you to add users. You must click Add each time you add a user to the User List.
y Delete User: Select a user from the pull-down list and click the Delete button to remove the user from the list.
y User List: This list shows all of the users added.
To Next Page
Loading...
