D-Link DCS-930L Setup Guide

D-Link Technical Support – How to record using mydlink camera's. Page 11 of 17
Search:
22a. Click on the Search button. Within a couple of seconds D-Link ViewCam would have
automatically found your camera. Click on the box field to select the camera. Type in the
User Name and Password used to access your camera's Web Configuration. Click on the
OK button:
22b. We can now see the camera has been added to D-Link D-ViewCam.
Click on the OK button to complete this process. Please jump to Step 23.
Insert:
22c. Click on the Insert button. The settings are as follows:
Name: Type in a name i.e. Room

D-Link DCS-930L Specifications

General

Maximum resolution	640 x 480 pixels
White balance	Auto
Minimum illumination	1 lx
Sensor type	CMOS
Optical sensor size	1/5 \
Digital zoom	4 x
Security algorithms	WEP, WPA, WPA2
Video motion detection	Yes
Cabling technology	10/100Base-T(X)
Supported network protocols	IPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage	100-240 V
DC output current	1.2 A
DC output voltage	+5V
AC input frequency	50 - 60 Hz
Power over Ethernet (PoE)	-
Power consumption (typical)	2 W
Ethernet LAN (RJ-45) ports	1
Certification	FCC B, IC, C-Tick, CE
Placement supported	Indoor
Dimensions (WxDxH)	27.2 x 60 x 96 mm
Compatible operating systems	Windows XP / Vista / 7
Flash memory	4 MB
Internal memory	32 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Form factor	Cube

Weight and Dimensions

Weight	76.9 g